Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Dirtrider

Pages: [1] 2 3
1
Shineray ATVs / Re: STIXE won't start
« on: January 02, 2011, 05:58:02 AM »
Cheers. I'll look at the main fuse tomorrow and let you know how i get on

Jason

Hi Jason!

We have not riding shinerays atv but we have theres X2 bike and on that we have same problem.
And that problem is the start buttom,check if you have contact there if it not are the fuse.

/Micael

2
Here is some videos from GGN that we in Defenda racind compete in.
I some of the videos you can see a X2 bike,but it is difficulte to see in all that mudd.
Of six X2 bikes four get to the finish two crashed out.
http://www.youtube.com/watch?v=7NWy0RfF-Co (The video's owner prevents external embedding)
http://www.youtube.com/watch?v=9kmB_nlwVco (The video's owner prevents external embedding)
http://www.youtube.com/watch?v=tzXJXgp9BTY (The video's owner prevents external embedding)
http://www.youtube.com/watch?v=wAeD4b8AdaA (The video's owner prevents external embedding)

3
X2 | XY250GY-2 / The Best team in the world
« on: September 30, 2010, 04:47:48 AM »


Team Defenda Racing Sweden i think is the best chinees brand team in the world today.?
All on Shineray X2 bikes before the big race 25-26 september "Ränneslättsloppet" 5 laps of 22km enduro.
best plc was 5e in class 6.
Results:http://www.ranneslattsloppet.nu/dokument/resultat/Resultat2010.pdf

4
Pics and Videos / Re: A couple of the XY250GY-2 with its guts exposed
« on: August 28, 2010, 09:02:55 AM »
Did you buy the camshaft and carb as off the shelf parts or did you have to get them custom made?

We custom made all parts from orginal parts.
But we have send cam shafts to Shineray for test.
One more thing on your bike are the old exhaust mounted (in pics) that we have are the new one, that is more straight so you get more rpm. With that you have you get more tourqe from buttom and less rpm on top.

5
X2 | XY250GY-2 / Re: Big Bore to X2 (280cc)
« on: August 28, 2010, 08:49:28 AM »
There has been little change since my first post. Since we modify everything here in Sweden so it has become more of production costs. So a 280cc forged piston kit costs about 470euro and one set of cam shafts around 300euro, then the postage will be at these prices.
BUT it is a big but! I can not say how much more power it becomes with the 280cc, the most noticeable is the cam shafts allows you to wind the engine more and where to get more power on top. So I can recommend is replace cam shafts and above all sharpen up the hole in the carburetor. It should be ground so it looks the same on the bottom edge up to the edge of the inlet hole, this makes about 30% larger intake.
We have also run with one Mikuni vm34 with good results, but you have to change manifolds to mount around or original from honda nx 250 Dominator.
For more questions about tuning the X2 or X2 just talk, please send email to me directly, so you can get answer immediately.
Send to: defendaracing@hotmail.com

6
X2 | XY250GY-2 / 10-Hour race from Sweden
« on: August 06, 2010, 04:36:02 AM »
10-hour relay race with three drivers and three bikes. but we Defend Racing Team drove with three drivers and two bikes. The competition consists of ten hours to run as many laps as possible in the quickest time and with changing the drivers after each lap. We came up with a 7th place of 71 team and then it was five pro teams before us, we are very pleased with this effort. And to note is that we ran on brand new bikes taken out of its box the day before so they were completely original. GO FAST GO SHINERAY / Defenda.






7
Racing / Re: Racing Team From Sweden
« on: June 13, 2010, 12:52:16 AM »
Hi!
We on Team Defenda Racing did it again!
3rd place in a Enduro race with a standard X2.
Here is Marcus on podium 3rd place.

Is there no racers from uk with X2?

8
Racing / Re: Racing Team From Sweden
« on: June 06, 2010, 11:11:31 AM »
New pics from todays race in Motala Sweden.
Foto taken with mobile sorry for bad quality.
This is Anders with his Defenda R= 280cc,tuning camshaft,and mod carburator.
Notice his Shineray racing teamshirt.





We on team defenda racing can say that this bike(X2)are the best chines bike made today.


9
X2 | XY250GY-2 / Carburator kit VM34
« on: April 27, 2010, 10:14:38 PM »
Here is Defenda Racing carburator kit for X2 model.

10
X2 | XY250GY-2 / Re: Shineray X2 Exhaust note
« on: April 17, 2010, 01:01:23 PM »
The tires on X2 is realy great.
But we have problem with the silencer it break and fall off on motocross track.
Now we have make some changes like other brands.



11
X2 | XY250GY-2 / Re: Upgrade camshaft
« on: April 17, 2010, 12:51:19 PM »
Here in Ecuador th XY 250GY or XY250SRM as we called it, does not have  good rear suspention, the monoshock got broke inside and the bike falls down, we have to replace it in 50 bikes, any ssugestions.

Hi Pablo!

It look`s like you dont have the Fastace suspension on this bike,am i right?
We have Fastace suspension on our bikes and we have no problem at all,every one how have this bike like the suspension wery much.
And i even race with my bike every weekend and practice two times in week with it so if you dont have fastace on the bikes so upgrade it  then you have no problem.
/Micael

12
Racing / Re: Racing Team From Sweden
« on: April 17, 2010, 12:38:49 PM »
Greetings.
Here in Ecuador since august 2009 we set up a SHINERAY assembly line it`s call MASSLINE, please could you send us some pictures in high resolution. Respectably yours.


Pablo Arellano T.


Hi Pablo!
You can send me a mail on my home page in the contact. www.jmsracing.nu
or directly to defendaracing@hotmail.com
and tell us what foto you want.

Sincerly
Micael Swartz
Team manager

13
Pics and Videos / DEFENDA X2 Video
« on: March 31, 2010, 10:55:24 AM »
Video from Defenda Sweden.
Bike is Shineray X2 called Defenda in Sweden.
http://www.youtube.com/watch?v=QZ2L8IstL9E (The video's owner prevents external embedding)

14
Pics and Videos / Snow track riding from Sweden
« on: March 07, 2010, 09:54:55 AM »
Deep snowtrack riding from sweden (bjorkoby EK).
http://www.youtube.com/watch?v=lH-yX83lBlg (The video's owner prevents external embedding)

15
X2 | XY250GY-2 / Big Bore to X2 (280cc)
« on: February 14, 2010, 10:36:21 AM »
Hi all! 8)
Now I have tried my 280cc kit for X2an, it was all a little trouble getting everything in place when it was first well we did. We first attempt went piston against the cylinder head where they are 4mm larger than the combustion chamber in the cylinder head, so it was to grind a bit at the top. Now we know that we will turner of about 1.5 mm at top edge of the piston for failing to take in.
How did you feel when the bike with this installed? :P
Fitted with camshafts we have before, and with the 280cc, it was a clear improvement in performence. the price for this yet as long as is approximately = 350euro Cam shafts and cylinder include forged piston around 350euro. We are now waiting to grind up the gates of the cylinder head and expect probably by the same amount on the job to. 'll Try to see if I can get the bike into a brake bench to get exactly the torque on the rear wheel. But everything will be ready for spring I promise. 8)

Pages: [1] 2 3